21 Part Drone Building Video Manual Current Status Not Enrolled Price Free Get Started Login to Enroll Course Content Expand All Intro 2 Topics Expand Lesson Content 0% Complete 0/2 Steps Introduction to Course Drone Kit Parts How to Build a Drone 29 Topics Expand Lesson Content 0% Complete 0/29 Steps IMPORTANT INFO REGARDING THIS SECTION Part Placement Planning Soldering Bullet Connectors to ESCs Soldering ESCs to PDB Soldering Battery Connector to PDB Attaching Legs to Frame Installing Motors on Frame IMPORTANT NOTE ON SECURING RPI TO DRONE Securing RPI to Frame with Sticky Tape (Navio and Pixhawk) Securing RPI to Frame with Vibration Dampeners (Navio and Pixhawk) Install Pixhawk to Raspberry Pi (Pixhawk) Installing Top Plate to Drone Frame (Navio and Pixhawk) Fixing ESCs to Drone Arms Bind Receiver and Transmitter Bind Receiver and Transmitter (X6B Receiver) Calibrate ESCs Calibrate ESCs (X6B Receiver) Remove UBEC Line from All But One of the ESCs Correct Motor Spin Direction Fix PPM Encoder and RC Receiver to Frame (Navio and Pixhawk) Conclusion 1 Topic Expand Lesson Content 0% Complete 0/1 Steps So, What’s Next??
